Determination of hydraulic cement fineness using the air permeability apparatus
Determination of expansibility by autoclave method
Determination of normal hydraulic cement density
Determination of hydraulic cement setting time using the Vicat needle
Determination of compressive and flexural strength (cement)
Determination of density (cement)
Determination of microsilica density
Determination of the amount of residue on a 45-micron sieve
Accelerated pozzolanic resistance activity index with Portland cement
Grading of fine and coarse aggregates
Materials finer than the No. 200 (75-micron) sieve in washed mineral aggregates
Clay lumps and friable particles
Aggregate soundness using sodium or magnesium sulfate solution
Lightweight aggregate test
Resistance of coarse and fine aggregates to abrasion and impact in the Los Angeles machine
Determination of resistance of coarse aggregate particles to abrasion and impact in the Los Angeles machine
Measurement of alkali reactivity potential of carbonate rocks as concrete aggregates using the cylinder method
Ability to assess the reactivity of aggregates with alkalis using accelerated mortar bar method
Ability to determine expansibility through examination of changes in the length of concrete prisms resulting from the reaction of aggregates with alkalis
Concrete mix design
Determination of concrete modulus and Poisson’s ratio
Determination of water penetration depth in concrete
Determination of concrete permeability coefficient
Absorption of water by concrete
Mortar setting
Apparent refractory density
Refractory compressive strength
Refractory linear changes
GROUT elastic modulus
GROUT flexural strength
GROUT compressive strength
GROUT tensile strength
Shrinkage due to GROUT drying
Physical tests on gypsum and gypsum panels
Investigation of concrete resistance to freezing and thawing
